Headsets with noise cancellation.
-Headsets specifically developed for radio-telegraphy applications, with earphones designed for optimum environmental noise cancellation. |
|
Handsets.
-A line of modern products combining top performance with ergonomics for operator comfort. |
|
Headsets without noise cancellation.
-Rx/Tx headsets intended for use in low acoustic noise
environments. Dynamic-type microphone with sensitivity adjusted to reduce environmental noise. |
|
IRIG-B decoder.
-Provides readout and integrity checks on the time code transmitted by the satellite.
|
|
Fiber optics.
-A
line of products exploiting the advantages of fiber optics in military and professional applications.
|
|
MIL interfaces.
-A set of products designed to support system integration in compliance with military interface standards
|
|
PTT interfaces.
-A set of products designed to support system integration in compliance with PTT
interface standards. |
|
Audio Matrix
32x32.
-The Matrix provides switching of 32 input lines into 32 output lines , combining in the same matrix capabilities for switching both audio and Serial data lines.
|
|
Audio matrix
64 x64.
-The Matrix provides switching of 64 input lines into
64 output lines, combining in the same matrix capabilities for switching both audio and serial data lines
|
|
Rx antenna matrices.
-A family of RF matrices of modular construction which allow switching between antennas and RF receivers over the LF/MF/HF(20kHz÷32MHz)
frequency range
|
|
Audio Panel.
-Audio Panel is a voice and telegraphy Rx/Tx terminal for radio operators.
Provided with all the audio and telegraph interfaces , it allows Simplex/Duplex connection to a radio transmitter and a radio receiver
|
|
Amplified loudspeakers.
-A family of amplified loudspeakers specifically designed for shipboard and on field installations.
|
|
Radio intercom systems.
-A new line of products developed to support radio operators with
intercommunication and centralized operation facilities, by use of advanced networking techniques
|
|
Passive antenna multicoupler for rack.
-A family of passive Rx multicouplers characterized by advanced design
and new technologies to meet the most diversified antenna system requirements.
|
|
Active multicoupler
8+8 Outputs.
-A family of active Rx multicouplers using LNA
techniques and new generation components to minimize signal loss in the RF path between antennas and receivers. |
|
Active multicoupler
16 Outputs.
-A family of active Rx multicouplers using LNA
techniques and new generation components to minimize signal loss in the RF path between antennas and receivers. |
|
Card-mounted passive multicouplers 5 Outputs.
-A set of antennas-receivers multicouplers operating over the VLF/LF/MF/HF frequency range, available in a configuration which allows flexible use and integration with
other system functions in existing hardware. |
|
Card-mounted passive multicouplers 8 Outputs.
-A set of antennas-receivers multicouplers operating over the VLF/LF/MF/HF frequency range, available in a configuration which allows flexible use and integration with
other system functions in existing hardware. |
|
Rx preselector filters.
-A family of passive high-selectivity filters associated with RF communication receivers to improve the intermodulation and crossmodulation characteristics
in presence of strong interfering RF signals. |
|
Tx filters.
-A family of high-selectivity filters associated with RF communication transmitters to protect co-located RF receivers against noise,
spurious and interfering signals. |
|
RF power combiners.
-A family of RF power summing networks which allow operation of two or more RF transmitters. |
|
|
|
|
|
|
|
|
|
|
|
|
|